Final program 2021
| 16:00 – 16:20 | Welcome |
| 16:20 – 17:00 | Plenary Lecture 1 Prof. Dr. Rolf Mülhaupt Do we need to reinvent plastics? |
| 17:00 – 17:20 | Break |
HEALTH
| 17:20 -18:00 | Keynote lecture 1 Health Prof. Sarah Cartmell Conducting polymers and an electrospun polymer device for orthopaedic tissue repair |
| 18:00 – 18:20 | #4 Dr. Jérôme Vachon ANTIMICROBIAL/ANTIVIRAL POLYMERS TO PREVENT DISEASE TRANSMISSION THROUGH FOMITES: A COVID-19 CONSEQUENCE |
| 18:20 – 18:40 | #38 Prof.dr. Ton Loontjens IMMOBILIZED HYPERBRANCHED ANTIMICROBIAL COATINGS APPLICABLE ON VARIOUS SUBSTRATES |
| 18:40 – 19:00 | #152 Mr Nicolò Alvisi Multivalent solid-binding in designed proteins for antifouling coatings |
MOBILITY
| 17:20 – 18:00 | Keynote lecture 2 Mobility Dr. Thorsten Felder From New Routes to SiH Key-Monomers to Functional-Silicone Ship Coatings |
| 18:00 – 18:20 | #96 Anil Tiwari Advanced Material Testing, Modelling and Validation of Fibre-filled Materials for Sustainable Lightweight Design |
| 18:20 – 18:40 | #158 Drs. Stijn van Leuken Controlling solubility using polymer types, sizes and chain composition |
| 18:40 – 19:00 | #167 dr. ir. Judith van Gorp “HIPERBIOPOL”: HIGH PERFORMING BIOBASED POLYAMIDES FOR MOBILITY APPLICATIONS: INCORPORATION OF LONG CHAIN ALIPHATIC DIACIDS INTO HIGH MELTING POLYAMIDES |
ENERGY
| 17:20 – 18:00 | Keynote lecture 3 Energy Dr. Christoph Sievering Energy and its Importance for Industrial Transformation |
| 18:00 – 18:20 | #5 Dr. Pengcheng Huang Fine-Tuning of Solvation Environments in Liquid Phase Reactions Using PolymerModified Metal-Supported Catalysts |
| 18:20 – 18:40 | #31 Mr Ameya Krishna B Novel hot-pressed polyelectrolyte complex saloplastics as sustainable alkaline stable monovalent-ion selective anion exchange membranes |
| 18:40 – 19:00 | #26 Anil Tiwari Enabling Lightweight Applications through advanced material data and modeling |
CIRCULARITY
| 17:20 – 18:00 | Keynote lecture 4 Circularity Dr. Marnix van Gurp reLFT: a sustainable approach to upcycle thermoplastic composite waste |
| 18:00 – 18:20 | #192 Dr. Teun Sweere Design and Development of Sustainable Polymer Formulations: Machine Learning from Physics-Based Molecular Modeling |
| 18:20 – 18:40 | #180 Dr. Tetiana Kharandiuk DEGRADABLE POLYACETAL POLYOLS FROM RENEWABLE MATERIALS |
| 18:40 – 19:00 | #156 M. Sc. Pauline Voigt METHOD DEVELOPMENT FOR MONITORING OF FAST CURING POLYMER NETWORKS INCLUDING BIO-BASED COMPONENTS |
| 19:10 – 19:50 | Plenary lecture 2 Prof. Costantino Creton Mechanochemistry to quantitatively understand macroscopic fracture at the molecular scale |
| 19:50 – 21:00 | Welcome dinner |
| 08:00 – 09:00 | Registration |
| 09:00 – 09:40 | Plenary lecture 3 Prof. Dr. Jean-Marie Lehn Towards Adaptive Chemistry – Dynamic Adaptive Materials |
| 09:40 – 10:20 | Plenary lecture 4 Prof. Dr.-Ing. Matthias Wessling Synthetic Membranes made of Fuzzy Polymer Electrolyte Assemblies |
| 10:20 – 10:40 | Break |
| 10:40 – 11:20 | Keynote lectures |
HEALTH
| 10:40 – 11:20 | Keynote lecture 5 Health Prof. Ali Khademhosseini (online) Engineering in Precision Medicine |
| 11:20 – 11:40 | #22 MSc Larissa van Westerveld Complex coacervate-based underwater adhesives |
| 11:40 – 12:00 | #23 Ms. Tiemei Lu Multiphase complex coacervates droplets |
| 12:00 – 12:20 | #51 Dr. Reece Lewis GSH RESPONSIVE DELIVERY OF PDNA FOR GENE THERAPY WITH COACERVATE MICELLES |
MOBILITY
| 10:40 – 11:20 | Keynote lecture 6 Mobility Arnt Offringa Thermoplastic Composites – Towards More Sustainable Aviation |
| 11:20 – 11:40 | #110 PD-Eng Cristina Yolanda Rodriguez Iglesias Digitalization as an Enabler for PP Compound Product Development |
| 11:40 – 12:00 | #193 Stan Looijmans Synergy of fiber surface chemistry and flow: multi-phase transcrystallization in fiberreinforced thermoplastics |
| 12:00 – 12:20 | #34 Georgios Kafkopoulos The effect of Polydopamine thermal treatment on the adhesion of Poly(lactic acid) (PLA)-Metal co-molded joints |
ENERGY
| 10:40 – 11:00
11:00 – 11:20 |
#160 Kaat Valkeneers Narrowing the gap: Optimizing donor materials for truly transparant organic photocoltaics #78 Sander Smeets |
| 11:20 – 11:40 | #67 Mrs. Neshat Moslehi Collective Binding of Iron Ions in Terpyridine-Functionalized Polymers |
| 11:40 – 12:00 | #76 ir. Maarten Boomstra Effects of Branching and Polydispersity on the Thermal Conductivity of Paraffin Waxes |
| 12:00 – 12:20 | #87 ir. Jeroen Sol ANISOTROPIC STRUCTURAL COLOR IN A DIRECT INK WRITTEN CHIRAL POLYMER COATING |
CIRCULARITY
| 10:40 – 11:20 | Keynote lecture 7 Christoph Gahn Chemical Recycling: From plastic waste to virgin-grade products |
| 11:20 – 11:40 | #137 Dr. Alex van Herk CIRCULAR POLYMERS; INSERTING BREAK POINTS VIA CKA CHEMISTRY FOR RADICAL POLYMERIZATIONS |
| 11:40 – 12:00 | #40 Hugo Fouilloux A versatile and sustainable one-pot synthesis of biobased poly(meth)acrylates |
| 12:00 – 12:20 | #7 PhD Jules Stouten A Novel Sugar-derived Monomer for UV-curable Polyacrylates |
| 12:20 – 13:20 | Lunch |
HEALTH
| 13:20 – 14:00 | Keynote lecture 8 Health Dr. Charlotte Kjellander Towards a healthier society using human-centric wearables |
| 14:00 – 14:20 | #16 Prof. Andreas Herrmann Controlling Biological Systems by Ultrasound: Sonopharmacology and Sonogenetics |
| 14:20 – 14:40 | #33 Mr. Lucas Teunissen Controlled Synthesis and Characterization of Novel Thermoresponsive Polymer Brushes |
| 14:40 – 15:00 | #58 Miss Nicola Judge Glycopolypeptide Nanoparticles by N-Carboxyanhydride Polymerisation |
| 15:00 – 15:20 | #61 Dr. Erik Schwartz LNP™ ELCRES™ CRX PC COPOLYMER RESINS THAT IMPROVE CHEMICAL RESISTANCE AGAINST DISINFECTANTS |
MOBILITY
| 13:20 – 14:00 | Keynote lecture 9 Guralp Ozkoc Thermoplastic melt impregnation of carbon fibers for the fabrication of continuous fiber filamentsto be used in additive manufacturing |
| 14:00 – 14:20 | #199 Michelle Spanjaards Die shape optimization for extrudate swell using feedback control |
| 14:20 – 15:00 | Keynote lecture 10 Mobility Marjan Hemstede The influence of new mobility trends on elastomers |
| 15:00 – 15:20 | #15 MSc. Annemarie Maan REVERSIBLE ANTIFOULING POLYMER COATINGS |
ENERGY
| 13:20 – 14:00 | Keynote lecture 10 Essam Al-Sayed (online) Non-Metallic Applications, beyond Oil & Gas Industry |
| 14:00 – 14:20 | #123 Mr. Benoît Notredame NOVEL SOLID POLYMER ELECTROLYTES FOR SOLID-STATE BATTERIES |
| 14:20 – 14:40 | #41 Muhammad Irshad Baig Sustainable Polyelectrolyte Complex membranes prepared by a pH-induced Aqueous Phase Separation technique |
| 14:50 15:00
15:00 15:20 |
#200 Farzaneh Radmanesh Cyclomatrix polyphosphazene membranes for hot hydrogen separation#140 Joey Kloos The role of molecular order and orientation in liquid crystalline polymer membranes for gas separation |
CIRCULARITY
| 13:20 – 14:00 | Keynote lecture 11 Circularity Jesper Bøgelund Circular Design of Medical Devices |
| 14:00 – 14:20 | #12 Prof. dr. Louis Pitet Chemical Upcycling of Discarded Polyesters to High Value Thermoplastic Copolyester Elastomers |
| 14:20 – 14:40 | #121 Dr Amruta Sharma UNDERSTANDING THE PHASE SEPARATION AND CRYSTALLIZATION IN THERMOPLASTIC ELASTOMERS BASED ON RECYCLED PET |
| 14:40 – 15:00 | #163 Dr. Andrea Gargano Development of New Enzymes for the Depolymerization of Polyester Copolymers as Tool to Facilitate their Molecular Characterization |
| 15:00 – 15:20 | #14 Milad Golkaram Allocating Recycling Benefits in Lifecycle Assessment for Plastics: Categorization and Use of Product Property Specifications as per Value Chain |
| 15:20 – 15:40 | Break |
HEALTH
| 15:40 – 16:20 | Keynote lecture 12 Patricia Dankers Synthetic extracellular matrices based on supramolecular polymers |
| 16:20 – 16:40 | #49 Dr. Cornelus van Nostrum BIOTIN DECORATED ALL-HPMA BASED POLYMERIC MICELLES FOR PACLITAXEL DELIVERY |
| 16:40 – 17:00 | #107 Dr. Duc Le TARGETED DELIVERY OF HIGHLY POTENT TOXIN USING ELASTIN-LIKE PEPTIDE NANOPARTICLES |
| 17:00 – 17:20 | #84 Dr Bryn Monnery POLYCATIONS ACT AS PROTON TRANSFER CATALYSTS DURING POLYPLEX MEDIATED TRANSFECTION |
| 17:20 – 17:40 | #112 Mrs Smiljana Stefanovic Star Polypeptides Vectors with Degradable Core for Gene Delivery Applications |
| 15:40 – 16:00 | #122 Mr Lin Zhong Design of Dual-functional Injectable Hydrogels for Biologicals Delivery |
| 16:00 – 16:20 | #183 Dr. Olga Koshkina Fractal, Perfluorocarbon-Loaded Polymeric Nanocarrier Platform for 19F Magnetic Resonance Imaging and Delivery of Therapeutics |
| 16:20 – 16:40 | #188 Dr. Katharina Gottfried Developments in Krynac® NBR and Baypren® CR responding to recent health and safety demands |
| 16:40 – 17:00 | #198 Agnes Dobos Bioinks for 3D Printing |
| 17:00 – 17:20 | #191 MSc. Babs Van de Voorde POTENTIAL OF POLY(ALKYLENE TEREPHTHALATE)S TO CONTROL ENDOTHELIAL CELL ADHESION AND VIABILITY |
| 17:20 – 17:40 | Viera Khunova Multifunctional magnetic biopolymer nanofibers for healthcare applications |
CIRCULARITY
| 15:40 – 16:00 | #44 Miss Qian Qin RECOGNITION AND SELF-ASSEMBLY OF STEREO-CONTROLLED AND SEQUENCE-DEFINED OLIGOMERS AT SOLID-LIQUID INTERFACES |
| 16:00 – 16:20 | #108 PhD Student Carolane Gerbehaye Properties modulation of various polymers using solid-state modification technique |
| 16:20 – 16:40 | #109 Mr. Shen Su Prediction and Determination of the PBAT/PLA Blend Miscibility |
| 16:40 – 17:00 | #126 Mr. Gilles Koolen EVALUATION OF POLYFURFURYL ALCOHOL FOR HIGH PERFORMANCE HEMP FIBRE REINFORCED COMPOSITES |
| 17:00 – 17:20 | #134 Prof.Dr. Mehmet Kodal A-POSS AS AN ADHESION PROMOTER FOR NYLON 6.6 CORD AND NATURAL RUBBER COMPOUND |
| 17:20 – 17:40 | #170 Ir. Daniëlle Scheepers Charge density dependent polyelectrolyte complex formation for nanofiltration membranes |
| 15:40 – 16:20 | Keynote lecture 14 Circularity Dr. Lucie Prins Recycling of plastics by dissolution-precipitation: status and challenges |
| 16:20 – 16:40 | #81 Enzo Pichon Low-VOC waterborne biobased non-isocyanate polyurethane dispersions for coating applications |
| 16:40 – 17:00 | #172 Dr. Stefaan De Wildeman The moment durable plastics became too durable for this world |
| 17:00 – 17:20 | #24 Ms. Lauren De Grave Crosslinked polyaspartic acid hydrogels as biobased and biodegradable alternative for polyacrylic acid |
| 17:20 – 17:40 | #114 MSc. Kevin van der Maas BIODEGRABLE POLYESTERS DERIVED FROM CO2 AND GLUCOSE |
| 17:50 – 18:30 | Plenary lecture 5 Prof. dr. Steve Howdle CLEAN SYNTHESIS OF RENEWABLE POLYMERS |
| 18:30 – 19:10 | Plenary lecture 6 Hanne van der Kooij (winner Challa polymer prize) Let there be light: Quantitative imaging of nanoscale dynamics in polymer materials |
| 19:10 – 20:10 | Poster session Bites & drinks |
| 20:10 – 22:00 | Conference dinner |
| 08:00 – 09:00 | Registration |
| 09:00 – 09:40 | Plenary lecture 7 Prof. Dr. Brigitte Voit (winner PTN Medema lecture award) RESPONSIVE NANOCAPSULES AND MULTICOMPARTMENTS AS CELLULAR MIMICS |
| 09:40 – 10:20 | Plenary lecture 8 Dr. Sylvain Caillol Biobased radically polymerizable monomers for sustainable polymers |
| 10:20 – 10:40 | Break |
HEALTH
| 10:40 – 11:20 | Keynote lecture 15 Health Paul Deeben Resistance testing of polymers against surface disinfection processes |
| 11:20 – 11:40 | #89 Ir. Boris Arts CONTROLLING BLOOD COAGULATION IN SUPRAMOLECULAR VASCULAR ACCESS GRAFTS VIA A RESPONSIVE HEPARIN COATING |
| 11:40 – 12:00 | #56 Mr. Matin Rostamitabar Cellulose-Chitosan Aerogel Microfibers for Wound Dressing Applications |
| 12:00 – 12:20 | #182 ir. Paul Bartels Development of an adhesive supramolecular coating as the synthetic endocardium of a silicone artificial heart |
MOBILITY
| 10:40 – 11:20 | Keynote lecture 16 Mobility Dr.-Ing. Gerd Esser & Dr.-Ing. Philippe Dumazet Digital and green transformation of industrial polymer value chains |
| 11:20 – 11:40 | #113 Prof. Ken Ito Organic Semiconductor Switching Device processed from Self-doped Conductive Polymer |
| 11:40 – 12:00 | #154 Mr. Marcel Rijnkels EV BATTERY PROTECTION USING NORYL GTX™ MATERIAL WITH EXCELLENT LOW TEMPERATURE IMPACT PERFORMANCE |
| 12:00 – 12:20 | #185 MSc Hamoon Hemmatpour New insights in the polydopamine formation from nano-surface adsorption |
ENERGY
| 10:40 – 11:20 | Keynote lecture 17 Energy Prof. Dr. René Janssen Material and Device Design for Highly Efficient Organic Solar Cells |
| 11:20 – 11:40 | #128 Mr. Ashish Raj Bio-based solid electrolytes bearing multi-functional cyclic carbonates for solid-state lithium batteries |
| 11:40 – 12:00 | #157 MSc Rémy Richard Jacquemond Non-solvent Induced Phase Separation: A Synthetic Approach Towards High Performance Redox Flow Battery Electrodes |
| 12:00 – 12:20 | #171 Ph.D. Student Aldo Altomare Metal-Free Light-Catalyzed Synthesis of PVDF-based Block Copolymers |
CIRCULARITY
| 10:40 – 11:20 | Keynote lecture 18 Circularity Bart Haelterman Towards a more sustainable polyurethane world |
| 11:20 – 11:40 | #39 M. Sc. Ander Centeno NON-ISOCYANATE POLYURETHANES (NIPUs) FROM CARBONATED SOYBEAN OIL |
| 11:40 – 12:00 | #82 Mr. Prakhar Pouranick THERMAL DEGRADATION KINETICS OF BIO-BASED POLYURETHANES ASSISTED BY MODEL-FREE KINETICS AND KINETIC MODELLING |
| 12:00 – 12:20 | #8 Mr. Kenneth Cerdán-Gómez Humins-filled self-healing composites with enhanced healing under mild conditions |
| 12:20 – 13:20 | Lunch |
CIRCULARITY
| 13:20 – 13:40 | #174 Mr. Hamid Ahmadi Physical Network Formation through different mechanisms of Stereocomplex Crystallization in PLA-Based materials |
| 13:40 – 14:00 | #175 Ir. Jéré van Lente INCORPORATING BIOACTIVE PROTEINS IN POLYELECTROLTYE COMPLEX MEMBRANES PREPARED VIA AQUEOUS PHASE SEPARATION |
| 14:00 – 14:20 | #50 Mr. Filip Van Lijsebetten Activated covalent exchange reactions for fast (re)processable polymer networks |
| 14:20 – 14:40 | #178 Mr. Soumabrata Majumdar Efficient topology rearrangement in phosphate triester based dynamic covalent networks |
| 14:40 – 15:00 | #57 Ms. Stéphanie Engelen Bio-based vitrimers as circular materials |
| 15:00 – 15:20 | #101 MSc Sybren Schoustra Polyimine Networks as Versatile and Recyclable Polymer Materials |
| 15:20 – 15:40 | #129 Msc. Chongnan Ye Novel MXene vitrimer sensors with fast self-healing properties |
| 13:20 – 14:00 | Keynote lecture 24 Circularity Prof. dr. Kim Ragaert Where are the handles for chemistry to contribute to Circularity of Plastics? |
| 14:00 – 14:20
14:20 – 14:40 |
#161 Dr. Jan Duchateau Mechanical Recycling of Polyolefins – A view on SABIC’s development strategy for rigid PE applications #60 Frederik Wurm |
| 14:40 – 15:00 | #27 Ruth D. Rittinghaus Orthogonal Copolymerization Iron Catalyst Performs ATRP and ROP Simultaneously |
| 15:00 – 15:20 | #52 Prof. Dr. Stephen Picken Biobased polymer materials from waste |
| 15:20 – 15:40 | #99 Ms. Shivani Wadgaonkar LIVING ANIONIC POLYMERIZATION STUDIES OF ß–OCIMENE: An unexplored promising bio-based terpene monomer |
HEALTH
| 13:20 – 14:00 | Keynote lecture 19 Health Prof. Dr. Dimitrios Stamatialis Polymer based bioengineered organs |
| 14:00 – 14:20 | #63 Dr Ana Agustina Aldana Mimicking the dynamic and static ECM: designing double network hydrogel inks |
| 14:20 – 14:40 | #88 MSc. Martina Viola Silk-based inks: from molecules to well-organized fibrous scaffolds |
| 14:40 – 15:00 | #176 MSc Merel Janssen DYNAMIC HYDROGELS BASED ON CYCLIC THIOSULFINATE-BASED MACROMONOMERS FOR 3D CELL CULTURE |
| 15:00 – 15:20 | #48 MSc Vahid Asadi Alghalandis SOFT BY DESIGN: THERMOPLASTIC ELASTOMERS MIMICKING TISSUE MECHANICS |
| 15:20 – 15:40 | #195 Pascal Welzen Multifunctional Polymeric Nanovesicles as Vaccine Delivery Platform |
| 13:20 – 13:40
13:40 – 14:00 |
#98 Anna Szabó Development of gelatin-based biomaterial inks towards intestinal tissue engineering #103 Matthew Baker |
| 14:00 – 14:20 | #73 Drs. Jochen Vanderspikken INTERPLAY BETWEEN ELECTRONIC AND MORPHOLOGICAL PROPERTIES TO ACHIEVE EFFICIENT NARROWBAND ORGANIC NEAR-INFRARED DETECTORS |
| 14:20 – 14:40 | #77 Ir. Yari Foelen TIME TEMPERATURE INDICATORS FOR FOOD PACKAGING AND HEALTHCARE, BASED ON POLYMER LIQUID CRYSTAL COATINGS |
| 14:40 – 15:00 | #92 dr. Piet Driest DEVELOPMENT OF MACROMOLECULAR UREA SORBENTS FOR DIALYSATE REGENERATION IN A MINIATURE ARTIFICIAL KIDNEY DEVICE |
| 15:00 – 15:20 | #106 MSc. Benjamin Klemm TEMPORALLY PROGRAMMED POLYMER – SOLVENT INTERACTIONS USING A CHEMICAL REACTION NETWORK |
| 15:20 – 15:40 | #119 PhD. Student Nicolas Baleine Iontronic Touch Sensor Toward 3D-Printed Stacked Ionic Assemblies |
| 15:50 – 16:30 | Plenary lecture 9 Prof. Dr. Michael Meier RENEWABLILTY IS NOT ENOUGH: SUSTAINABLE SYNTHESIS OF BIOMASSDERIVED MONOMER AND POLYMERS |
| 16:30 – 16:50 | Award ceremonies |
| 16:50 – 17:20 | Closing remarks |
Final program 2021
You can download the final program here.
Prof. Subi Jacob George
Professor and Chair, New Chemistry Unit.
Also Faculty at School of Advanced Materials (SAMat)
Jawaharlal Nehru Centre for Advanced Scientific
Research (JNCASR), Bangalore.
Prof. Dr.-Ing. Matthias Wessling
Head of the Chair of Chemical Process Engineering (AVT.CVT). The core research field of the chair focuses on the development and application of membrane technology for current global challenges, particularly hybrid processes and electrochemical membrane reactors.
Prof. Dr. Dimitrios Stamatialis
Full Professor, (Bio)artificial organs, Department
of Biomaterials Science and Technology, TechMed
institute – Faculty of Science and Technology,
University of Twente, The Netherlands
Dr.-Ing. Gerd Esser
Along with an awesome team of experienced innovation managers, highly motivated digital developers and specialized experts at inpro, I try to contribute in making industrial engineering and production processes better and more efficient.